Drum mowers
Lawnmowers
Lawn tractors
Brushcutters
Mulchers
Multifunctional carriers
VARI modular system
Pressure washers
Water pumps
Wood chippers, shredders
Sweeping brushes
Wood saws
Log splitters
Earth augers 
VARI for children
New productsTerra I sweeping brush
Terra I sweeping brush
Product description
The sweeping brush is not only a single-purpose machine, but also a modular system. The KV100/Z sweeping brush with a working width of 100 cm can be changed for a snow thrower, a mulcher or a drum mower for cutting high grass in a few seconds.
The KV-100/Z sweeping brush is an implement only for the DSK-316 gearbox in all of its modifications. It serves for removing solid impurities or new-fallen snow on streets, pavements and paths with a solid and flat surface.
The hair of the new sweeping brushes are arranged into a spiral and the brush diameter is extended to 370 mm. Thanks to this technical change the brush sweeps better, the swept material is led to a side better, the bigger brush diameter prevents throwing (especially) snow back and prolongs brush lifetime. Thanks to the bigger diameter the circumferential speed is higher and sweeping dynamics is significantly improved. The new sweeping brushes are compatible with the previous version.
The KV-100/Z implement is very easily connected: insert it into the gearbox power take-off, secure it with the detent pin and you can start working in a few seconds.
INNOVATION:
- INNOVATED SWEEPING BRUSHES
- SPIRAL-ARRANGED HAIR
- INCREASED DIAMETER OF 370 MM
- LONGER HAIR LIFETIME
- HIGHER CIRCUMFERENTIAL SPEED
- BETTER SWEEPING DYNAMICS
- FULL COMPATIBILITY WITH THE PREVIOUS VERSION
Videos
Technical parameters
| Engine displacement | 160 cm3 |
|---|---|
| Oil filling volume in engine | 0,55 litres |
| Engine oil grade | SAE 30, 15W-40 |
| Fuel tank volume | 1,1 (0,91)* litres |
| Area performance | max 2200 m2/h |
| Working width | 100 cm |
| Type of gearbox | DSK-316.1PSVN |
| Number of speeds | 1 |
| Oil filling volume in a gearbox | 0,75 litres |
| Gearbox oil grade | SAE 90, 80W-90 |
| Engine type | HONDA GCV 160 |
| * | measured according to SAE J1349 methodology |
| Brush diameter | 37 cm |
| Working tool revolutions | 142 min-1 |
| Length x width x height | 2440 x 1010 x 1075 mm |
| Travel speed | 2,22 kph |
| Rear wheel size | 4.00-4 |
| Engine power | 4,1/3600/5,5 (3,3/3600/4,4)* kW/rpm/HP |
| Torque | 11,4/2500 (9,4/2500)* N.m/rpm |
| Unleaded fuel | 91-95 oct. no. |
| Clutch type | centrifugal |
| Height adjustment of handlebars | yes |
| Side adjustment of handlebars | yes |
| Number of adjustment positions | 5 |
| Drive switching off | yes |
| Adjusted engine revolutions | max 3600 (+/-100) rpm |
| Article no. | 4281 |
