The TN-01 drive axle is used for transport with VARI minitractors. The wheels are connected to the gearbox using a long axial pin.
The TN-01 drive axle consists of 12" wheels, half-axis with a hexagonal carrier, which are put into a free wheel nave of wheel and a long axial pin, which goes through the wheels, half-axis and through the gearbox, including a coupling material. The free wheel is equipped with a locking pin and thus the free wheel has 4 functions. These are changed using a handle with an arrow, which demonstrates the direction of wheel turning. The wheels with an arrow pattern are connected with four screws to the iron-plate rims.
The wheels are equipped with a set of outer weights and it is possible to add also inner weights on the wheel rims. The drive axle is connected to the gearbox putting the half-axis to the output shaft of the gearbox and secured using and tightening the axial pin, which goes through both half-axis and the gearbox. After replacing the drive axle with a loosening device is the minitractor converted into a professional rotary tiller with the working width of up to 115 cm.
The DSK-317/S three-speed gearbox with a reverse is intended for TERRA-VARI systems, where "axle pin" is needed for gripping…
Snow chains for TN drive axle
The snow chains for a VARI minitractors are useful not only as a winter equipment, but may help in the wood as well,…